simaio p5.3
Technical Specifications:
•Type: Solid State
•Configuration: Dual Mono
•Design: Open Loop / Balanced Differential
•Single-ended inputs (RCA): 4 pairs
•Balanced Inputs (XLR): 1 pair
•Input Device Types: J-FET
•Input Impedance: 22,000 ohms
•Input Sensitivity: 200mV - 4.0V RMS
•Balanced Outputs (XLR): 1 Pair
•Single-Ended Outputs (RCA): 2 Pairs (fixed & variable)
•Output Impedance - XLR / RCA: 100 / 50 ohms
•Gain Control: M-eVOL
•Gain: 9dB
•Signal-to-noise Ratio: 109dB @ full output
•Maximum Output Voltage - XLR / RCA: 12 / 6 Volts
•Frequency Response 5Hz - 100kHz: (+0 / -0.1dB)
•Crosstalk @ 1kHz: < -110dB
•IMD: unmeasurable
•THD (20Hz - 20kHz): < 0.002%
Custom Installation Features:
•12 Volt Trigger Output Operation: Direct Logic (0V = off, 12V=on) using a 3.5mm mono microphone jack with a 1000 ohms input impedance of and current requirement of 12mA.
•IR input: 1/8" mini-jack
General Specifications:
•Available Faceplate Finishes: Black and Silver
•Remote Control: All-Aluminum Full Function
•AC Power Requirements: 240V / 50Hz (120V / 60Hz)
•Power Consumption idle: 6 watts
•Fuse Replacement - 230V 0.1A slow blow
•Fuse Replacement - 120V 0.2A slow blow
•Shipping Weight: 11 kg / 25 lbs
•Dimensions (W x H x D): 43.2 x 10.0 x 38.8 cm. (17.0 x 3.9 x 15.3 in.)
Optional Phono Section Specifications:
•Input Impedance - Adjustable: 100 Ω and 47K Ω
•Input Capacitance - Adjustable: 0pF and 100pF
•Gain - Adjustable: 40dB and 60dB
•Input overload @ 40dB gain: 58mV RMS
•Input overload @ 60dB gain: 3mV RMS
•Signal-to-noise Ratio (full scale @ 40dB gain): 107dBr
•Signal-to-noise Ratio (full scale @ 60dB gain): 85dBr
•Frequency Response: 20Hz - 20kHz (±0.5dB)
•Crosstalk @ 1kHz: -97dB
•IMD: < 0.009%
•THD (20Hz - 20kHz): < 0.001%