美国原点INCRECABLE TIA260 合并机
90新！使用时间短！全部原装管！包装附件齐全！
具体成交请联系微信或直接电话13318366696谢谢！
TIA-260 Tube Integrated Stereo Amplifier30Watt x 2 (Triode), 60Watt x 2 (Ultra Linear), KT88 x 4 / 6SN7 x 2 / 6SL7 x 2 ( All Matching DCT tubes )
DCT Choke x 2, Silver Plated 4N OFHC internal wiring for audio paths.
MSRP: $3,980 / set
TECHNICAL SPECIFICATION
Power Output
Minimum sine wave continuous average power output per
channel, both channels operating is:
60 watts into a 4 ohm load
60 watts into an 8 ohm load
Rated Power Band
20Hz to 20,000Hz
Total Harmonic Distortion
Maximum Total Harmonic Distortion at any power level from 250 mill watts to rated power output is:
0.5% for a 4 or 8 ohm load
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 50,000Hz
Sensitivity
High Level: 450mV for 2.5V rated output
Power Amplifier Input: 2.5V for rated output
A-Weighted Signal To Noise Ratio
High Level: 99dB below rated output
Power Amplifier: 120dB below rated output
Inter Modulation Distortion
Maximum Inter modulation Distortion if instantaneous peak output does not exceed twice the rated output,
for any combination of frequencies from 20Hz to 20,000Hz is:
0.5% for a 4 or 8 ohm load
Input Impedance
High: Level, 100K ohms
Maximum Input Signal
High Level: 8V
Voltage Gain
High Level to Main: 18dB
Wide Band Damping Factor
Greater than 30
Power Requirements
100 Volts, 50/60Hz at 4.0 amps
110 Volts, 50/60Hz at 4.0 amps
120 Volts, 50/60Hz at 4.0 amps
220 Volts, 50/60Hz at 2.0 amps
230 Volts, 50/60Hz at 2.0 amps
240 Volts, 50/60Hz at 2.0 amps
Note: Refer to the rear panel of the TIA-260
for the correct voltage.
Preamplifier Tube Compliment
2 -6SL7 Preamp Circuitry
2 -6SN7 High Level Circuitry
Power Amplifier Tube Compliment
4 - KT88
Overall Dimensions
Width is 16-7/8 inches (43.0cm)
Height is 8-1/4 inches (21.0cm) including feet
Depth is 16-1/2 inches (42.0cm) including the Front Panel and Knobs
Weight
56 pounds (25.5kg) net, 60 pounds (29.5kg) in shipping carton
